There are two ways to use Dedicated Datacenter Proxies, Whitelist Auth and User & Pass Auth, choose one to get started.Method 1: User & Pass AuthStep 1: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 2: In the Account Settings section, click on "User List" and then select "Add User."Note: Username and password must contain both letters and digits. Special characters are not allowed.Step 3: Check your proxy in Dedicated Datacenter Proxies - IP Management. Paste the IP into your proxy software to configure proxy.The format would be IP:Port:Username:Password.Port 2333: Use it with credential authentication and HTTP(S)/Socks5 protocol to apply TCP protocol.Port 2340: Use it with credential authentication and Socks5 protocol to apply UDP and TCP protocol.Step 4: Take Gologin as an example to configure the proxy of port 2333. Open the Gologin app and click on "Add profile." The proxy type can be HTTP or Socks5.Step 5: Take Gologin as an example to configure the proxy for port 2340. Open the Gologin app and click on "Add profile." The proxy type can only be selected as Socks5.Step 6: Once the settings are completed, click on "Check Proxy" to ensure that the proxy is available. Congratulations! You have successfully set up the proxy. Click on "Create Profile" to finalize the setup.Step 7: Click on "Run" to start using the configured proxy.Method 2: Whitelist AuthStep 1: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 2: In the Account Settings section, click on "IP Whitelist" and then select "Add".Step 3: Check your "Current IP" and add it to the whitelist. Select "Others" as the type. After adding the IP, click "Confirm".Step 4: Check your proxy in Dedicated Datacenter Proxies - IP Management. Paste the IP into your proxy software to configure proxy. Note: The format would be IP:Port. And the port should be 2000.Step 5: Take Gologin as an example to configure the proxy for port 2000. Open the Gologin app and click on "Add profile." The proxy type can be HTTP or Socks5.Step 6: After the settings are completed, click "Check Proxy".Check that the proxy is available. Congratulations, you have successfully set up the proxy. Click "Create Profile" to complete the setup.Step 7: Click "Run" to start using it.
Step 1: Go to pyproxy.com and click on the "Log In" button.Step 2: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 3: In the Account Settings section, click on "IP Whitelist" and then select "Add".Step 4: In the pop-up window, add the IP address you want to whitelist and select "Others" as the type. Note: For security reasons, avoid adding public server IPs to your whitelist. The "Others" option includes Residential Proxies, Static ISP Proxies, and Dedicated DC Proxies.Step 5: Go to "Get Proxy" and choose "API". Set the count of proxies you need and select the desired country for the proxies. Customize other parameters if necessary.Step 6: Click on "Generate API links" to obtain your proxy link. You can configure this link in your proxy software or your own program to utilize the proxies.Step 7: If you require a list of proxies, you can click on "Open link" to access it.Step 8: Now, let's configure the proxy using Gologin as an example. Open the Gologin app and click on "Add profile".Step 9: Navigate to "Proxy" and select "Your proxy". Copy the proxy information you generated on PYPROXY and paste it into the appropriate fields in Gologin.Step 10: Once the settings are completed, click on "Check Proxy" to ensure that the proxy is available. Congratulations! You have successfully set up the proxy. Click on "Create Profile" to finalize the setup.Step 11: Click on "Run" to start using the configured proxy.
Step 1: Go to pyproxy.com and click on the "Log In" button.Step 2: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 3: In the Account Settings section, click on "User List" and then select "Add User."Step 4: Create a subaccount by providing a username and password in the pop-up window. Note: Username and password must contain both letters and digits. Traffic Limit set to 0 means no upper limit.Step 5: Head to "Get Proxy" and choose "User & Pass Auth." Select the desired region, subuser, sticky session, and any other parameters you need.Step 6: Then you’ll get your proxy information. Copy the details provided and configure them in your preferred proxy software. For this tutorial, we will use Gologin as an example.Step 7: Open the Gologin app and click on "Add profile."Step 8: Navigate to "Proxy" and choose "Your proxy." Paste the proxy information generated from PYPROXY into the appropriate fields in Gologin. For Proxy type, PYPROXY supports HTTP/HTTPS/SOCKS5. We’ll use SOCKS5 in this case.Step 9: After completing the settings, click on "Check Proxy" to verify the availability of the proxy. If everything is working correctly, congratulations! You have successfully set up the proxy. Click on "Create Profile" to finalize the setup.Step 10: Click on "Run" to start using the configured proxy.
There are two ways to use static ISP proxies, Whitelist Auth and User & Pass Auth, choose one to get started.Method 1: User & Pass AuthStep 1: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 2: In the Account Settings section, click on "User List" and then select "Add User."Note: Username and password must contain both letters and digits. Special characters are not allowed.Step 3: Check your proxy in Static ISP Proxies - IP Management. Paste the IP into your proxy software to configure proxy.The format would be IP:Port:Username:Password.Port 2333: Use it with credential authentication and HTTP(S)/Socks5 protocol to apply TCP protocol.Port 2340: Use it with credential authentication and Socks5 protocol to apply UDP and TCP protocol.Step 4: Take Gologin as an example to configure the proxy of port 2333. Open the Gologin app and click on "Add profile." The proxy type can be HTTP or Socks5.Step 5: Take Gologin as an example to configure the proxy for port 2340. Open the Gologin app and click on "Add profile." The proxy type can only be selected as Socks5.Step 6: Once the settings are completed, click on "Check Proxy" to ensure that the proxy is available. Congratulations! You have successfully set up the proxy. Click on "Create Profile" to finalize the setup.Step 7: Click on "Run" to start using the configured proxy.Method 2: Whitelist AuthStep 1: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 2: In the Account Settings section, click on "IP Whitelist" and then select "Add".Step 3: Check your "Current IP" and add it to the whitelist. Select "Others" as the type. After adding the IP, click "Confirm".Step 4: Check your proxy in Static ISP Proxies - IP Management. Paste the IP into your proxy software to configure proxy. Note: The format would be IP:Port. And the port should be 2000.Step 5: Take Gologin as an example to configure the proxy for port 2000. Open the Gologin app and click on "Add profile." The proxy type can be HTTP or Socks5.Step 6: After the settings are completed, click "Check Proxy".Check that the proxy is available. Congratulations, you have successfully set up the proxy. Click "Create Profile" to complete the setup.Step 7: Click "Run" to start using it.
We are pleased to announce that our Static ISP proxies and Dedicated Datacenter proxies now support UDP (User Datagram Protocol). This update provides you with enhanced capabilities and flexibility in your network applications. Supported plans: Static ISP & Dedicated Datacenter ProxiesSupported auth-method: User-pass-authSupported protocol: Socks5Supported port: 2340 How To Use:Step 1. Create a sub-user and password in User List.Step 2. Check your proxy in Static ISP Proxies - IP Management.Step 3. In your proxy software or fingerprint browser, Select Socks5 as the proxy typeStep 4. Input the following format, replacing the placeholders with your specific details:IP:Port(2340):Username:PasswordFor example: 154.85.117.243:2340:username01:password01
Step 1: Go to pyproxy.com and click on the "Log In" button.Step 2: Log in to your PYPROXY account using your credentials and navigate to your dashboard.Step 3: In the Account Settings section, click on "User List" and then select "Add User."Step 4: Create a subaccount by providing a username and password in the pop-up window. Note: Username and password must contain both letters and digits. Traffic Limit set to 0 means no upper limit.Step 5: Go to "Get Proxy" and choose "User & Pass Auth". Click "Rotating Datacenter". Select the desired region, subuser, sticky session, and any other parameters you need.Step 6: Then you’ll get your proxy information. Copy the details provided and configure them in your preferred proxy software. For this tutorial, we will use Gologin as an example.Step 7: Open the Gologin app and click on "Add profile."Step 8: Navigate to "Proxy" and choose "Your proxy." Paste the proxy information generated from PYPROXY into the appropriate fields in Gologin. For Proxy type, PYPROXY supports HTTP/HTTPS/SOCKS5. We’ll use SOCKS5 in this case.Step 9: After completing the settings, click on "Check Proxy" to verify the availability of the proxy. If everything is working correctly, congratulations! You have successfully set up the proxy. Click on "Create Profile" to finalize the setup.Step 10: Click on "Run" to start using the configured proxy.
In the vast landscape of digital communications, IP addresses serve as the unique identifiers for devices connected to the internet. While most IP addresses function seamlessly, some may be associated with malicious activities, spam, or other undesirable behaviors. A "clean" IP address, on the other hand, is one that is free from such associations and enjoys a positive reputation on the internet. In this article, we delve into the key characteristics that define a clean IP address, exploring why they matter and how to maintain this status.1. Lack of Malicious HistoryAt its core, a clean IP address is one that has never been used for illegal or unethical activities. It has no history of being blacklisted by anti-spam organizations, internet service providers (ISPs), or other reputable entities due to its involvement in phishing scams, malware distribution, or spam campaigns. A clean IP's absence from such lists ensures that it enjoys smooth communication with other networks and services.2. Consistent ReputationBeyond a clean past, a clean IP address maintains a positive reputation over time. This means that it continues to be used responsibly and does not attract negative attention from the internet community. ISPs and other stakeholders regularly monitor IP addresses for suspicious behavior, and a consistently clean IP demonstrates its owner's commitment to ethical internet practices.3. High TrustworthinessA clean IP address enjoys a high level of trust from internet users and service providers alike. Email servers, for instance, are more likely to accept messages originating from a clean IP, reducing the chances of legitimate emails being marked as spam. Similarly, online services and applications may grant increased privileges or functionality to users with clean IP addresses, recognizing them as reliable and trustworthy.4. Stable ConnectivityA clean IP address typically experiences stable and reliable connectivity. Since it is not associated with malicious activities, it is unlikely to be blocked or throttled by ISPs or other network providers. This ensures that data transmission is efficient and uninterrupted, enhancing the overall user experience.5. Compliance with Policies and RegulationsMaintaining a clean IP also requires compliance with all relevant policies and regulations. This includes adhering to anti-spam laws, data protection regulations (such as GDPR or CCPA), and any other legal frameworks governing internet usage. By staying compliant, IP address owners demonstrate their commitment to responsible internet behavior and protect themselves from legal liabilities.6. Active Monitoring and MaintenanceKeeping an IP address clean requires active monitoring and maintenance. This includes regularly scanning for malware, updating security software, and promptly addressing any security breaches or suspicious activity. Owners of clean IPs should also be vigilant about the types of activities conducted through their networks, ensuring that they do not inadvertently engage in behaviors that could compromise their IP's cleanliness.7. Positive Impact on SEO and Online ReputationFinally, a clean IP address can positively impact search engine optimization (SEO) and online reputation. Search engines and other ranking algorithms take into account various factors when determining a website's credibility and relevance, including the reputation of its IP address. A clean IP can help boost a website's search rankings and improve its overall online reputation, attracting more visitors and enhancing its credibility in the digital world.In conclusion, a clean IP address is characterized by a lack of malicious history, consistent reputation, high trustworthiness, stable connectivity, compliance with policies and regulations, active monitoring and maintenance, and a positive impact on SEO and online reputation. By understanding and embracing these characteristics, individuals and organizations can ensure that their IP addresses remain clean and enjoy the benefits that come with a positive internet presence.
Why Set Permission Setting?Setting permission settings serves as a protective measure to prevent unreasonable usage and misuse of your traffic. By allowing only authorized IPs and domain names within your specified range, you can enhance the security of your account's traffic and prevent abuse.How to Set Permission Setting?Step 1: Log in to the Dashboard and access Account Settings. Locate the Permission Setting section.Step 2: Configure Whitelist, Blacklist, and Blocked Domains according to your requirements.Whitelist: Only whitelisted IP subnets are permitted to consume your traffic. For example, you can add 192.168.0.0/24 to allow traffic from 192.168.0.0 to 192.168.255.255.Blacklist: Restrict traffic from IP subnets listed in the blacklist. For instance, adding 192.168.0.0/24 will exclude traffic usage from 192.168.0.0 to 192.168.255.255.Blocked Domains: Block traffic to specific websites by setting up blocked domains. If you add google.com, all traffic from google.com will be blocked.Step 3: Once the settings are configured, your traffic will only be consumed within the permitted scope.Important Note:1. By default, all IPs and domain names can use your traffic unless you make changes to the permission settings. It's important to note that this feature does not conflict with IP whitelist authentication. Consider it as a traffic management door, where only IP subnets with keys can be added to the whitelist authentication list.2. The permission settings are exclusively available for traffic proxy plans.By following these steps, you can effectively manage your traffic plan usage and ensure the security of your account's traffic.
Changing the IP address of your own computer is a common practice for various reasons, such as privacy, security, or accessing region-restricted content. However, it's important to note that there are legal and ethical considerations when it comes to changing your IP address.First and foremost, it's essential to understand that changing your IP address without proper authorization may be against the terms of service of your Internet Service Provider (ISP) or network administrator. In some cases, it could even be illegal, especially if you are attempting to evade restrictions or engage in illicit activities.If you are considering changing your IP address, here are a few important points to keep in mind:1. Understanding IP Address: An IP address is a unique numerical label assigned to each device connected to a computer network. It serves two main functions: identifying the host or network interface and providing the location of the host in the network.2. Dynamic vs. Static IP Addresses: Most users have dynamic IP addresses, which means that their IP address can change over time, typically when they reconnect to the internet. In contrast, static IP addresses remain constant and are often used for specific purposes, such as hosting websites or servers.3. Legal and Ethical Considerations: Before attempting to change your IP address, it's crucial to review the terms of service of your ISP or network administrator. Unauthorized manipulation of your IP address can result in severe consequences, including account suspension or legal action.4. Methods for Changing IP Address: There are several methods for changing your IP address, including using a Virtual Private Network (VPN), proxy servers, or contacting your ISP for a new address. Each method has its own advantages and limitations, so it's important to choose the most suitable option for your specific needs.5. Privacy and Security: Changing your IP address can enhance your online privacy and security by masking your true location and identity. This can be particularly useful when accessing public Wi-Fi networks or when you want to prevent websites from tracking your online activities.6. Accessing Region-Restricted Content: Some users change their IP address to bypass geo-restrictions and access content that is not available in their current location. While this may seem like a harmless workaround, it's essential to respect copyright laws and licensing agreements when accessing digital content.7. Professional Guidance: If you are considering changing your IP address for professional reasons, such as setting up a secure remote connection or hosting a website, it's advisable to seek guidance from IT professionals or network administrators to ensure compliance with relevant regulations and best practices.While changing your IP address can have legitimate purposes, it's crucial to approach this process with caution and respect for legal and ethical considerations. Always review the terms of service of your ISP or network administrator, and consider seeking professional guidance if you are unsure about the proper procedures for changing your IP address. By doing so, you can ensure that you are using this capability responsibly and in accordance with applicable laws and regulations.
Are you looking to purchase residential proxies for TikTok? Residential proxies can be a valuable tool for social media marketing, data scraping, and other online activities. In this blog post, we will discuss how to purchase residential proxies for TikTok and how to set them up.What are Residential Proxies?Residential proxies are IP addresses provided by Internet Service Providers (ISPs) to homeowners. When you use a residential proxy, your internet traffic appears to come from a real residential address, making it more difficult for websites to detect that you are using a proxy. This can be useful for accessing geo-restricted content, avoiding IP bans, and maintaining online privacy.Purchasing Residential Proxies for TikTokThere are several ways to purchase residential proxies for TikTok. You can buy them from proxy providers, who offer packages with a certain number of residential IP addresses and bandwidth. Some popular residential proxy providers include Luminati, Smartproxy, and Oxylabs. These providers offer a range of pricing options and features, so it's important to compare them and choose the one that best fits your needs.When purchasing residential proxies for TikTok, consider the following factors:1. Location: Make sure the proxy provider offers IP addresses from the locations you need. If you are targeting a specific country or region on TikTok, you will want residential proxies from that area.2. Reliability: Look for a provider with a good reputation for uptime and performance. You don't want your proxies to be constantly unavailable or slow.3. Price: Consider the cost of the residential proxies and whether it fits within your budget. Some providers offer pay-as-you-go plans, while others require a monthly subscription.Setting Up Residential Proxies for TikTokOnce you have purchased residential proxies for TikTok, you will need to set them up to use with the platform. Here are the general steps to set up residential proxies for TikTok:1. Obtain Proxy Credentials: When you purchase residential proxies, the provider will give you credentials to access the proxy servers. This typically includes an IP address, port number, username, and password.2. Configure Proxy Settings: In your TikTok account settings or in your internet browser, find the option to set up a proxy. Enter the proxy credentials provided by your proxy provider.3. Test the Connection: After entering the proxy credentials, test the connection to ensure that the residential proxies are working properly with TikTok. You can do this by accessing TikTok and checking if your IP address is different from your actual location.4. Monitor Performance: Keep an eye on the performance of your residential proxies. If you experience any issues with speed or connectivity, reach out to your proxy provider for assistance.Using Residential Proxies ResponsiblyIt's important to use residential proxies responsibly and in compliance with TikTok's terms of service. Avoid engaging in any activities that violate TikTok's rules, such as spamming, botting, or other forms of abuse. Be mindful of the impact of your proxy usage on others and on the platform itself.In conclusion, purchasing residential proxies for TikTok can be a valuable investment for marketers and businesses looking to expand their reach on the platform. By choosing a reputable proxy provider and setting up the proxies properly, you can leverage residential IPs to access TikTok securely and efficiently. Remember to use residential proxies responsibly and in accordance with TikTok's guidelines to ensure a positive and compliant experience.