Email
Enterprise Service
Telegram
Submit
Basic information
Waiting for a reply
Your form has been submitted. We'll contact you in 24 hours.
Close

How to Use Dedicated Datacenter Proxies on PYPROXY?

Author:PYPROXY
2023-04-27 11:58:23


There are two ways to use Dedicated Datacenter Proxies, Whitelist Auth and User & Pass Auth, choose one to get started.


Method 1: User & Pass Auth


Step 1: Log in to your PYPROXY account using your credentials and navigate to your dashboard.


1.1.jpg


Step 2: In the Account Settings section, click on "User List" and then select "Add User."


1.2.0.jpg



Note: Username and password must contain both letters and digits. Special characters are not allowed.


a88137e977cf07dbe0363136c6869a8c.jpg


Step 3: Check your proxy in Dedicated Datacenter Proxies - IP Management. Paste the IP into your proxy software to configure proxy.

The format would be IP:Port:Username:Password.

Port 2333: Use it with credential authentication and HTTP(S)/Socks5 protocol to apply TCP protocol.

Port 2340: Use it with credential authentication and Socks5 protocol to apply UDP and TCP protocol.


1.3.jpg


Step 4: Take Gologin as an example to configure the proxy of port 2333. 

Open the Gologin app and click on "Add profile." The proxy type can be HTTP or Socks5.


1.4.jpg


Step 5: Take Gologin as an example to configure the proxy for port 2340. 

Open the Gologin app and click on "Add profile." The proxy type can only be selected as Socks5.


1.5.jpg


Step 6: Once the settings are completed, click on "Check Proxy" to ensure that the proxy is available. Congratulations! You have successfully set up the proxy. Click on "Create Profile" to finalize the setup.


1.6.jpg


Step 7: Click on "Run" to start using the configured proxy.


1.7.jpg


Method 2: Whitelist Auth


Step 1: Log in to your PYPROXY account using your credentials and navigate to your dashboard.


2.1.jpg


Step 2: In the Account Settings section, click on "IP Whitelist" and then select "Add".


2.2.jpg


Step 3: Check your "Current IP" and add it to the whitelist. Select "Others" as the type.  After adding the IP, click "Confirm".


e3df597584c5154f4e7f7fb568e4f1fc.jpg


Step 4: Check your proxy in Dedicated Datacenter Proxies - IP Management. Paste the IP into your proxy software to configure proxy. 

Note: The format would be IP:Port. And the port should be 2000.


2.4.jpg


Step 5: Take Gologin as an example to configure the proxy for port 2000. 

Open the Gologin app and click on "Add profile."  The proxy type can be HTTP or Socks5.


2.5.jpg


Step 6: After the settings are completed, click "Check Proxy".

Check that the proxy is available. Congratulations, you have successfully set up the proxy. Click "Create Profile" to complete the setup.


2.6.jpg


Step 7: Click "Run" to start using it.


2.7.jpg